BRESSER Weerstation - Basisstation - Compatibel met 7003230 | bol (2024)

FAQs

Are Bresser weather stations any good? ›

Overall it's a good product, fairly accurate when measured against known data, e.g. air pressure and indoor / outdoor temperatures. However, it's one major flaw is that of the wind speed indicator. My outdoor unit is 5 metres above ground on a pole.

On the Pro Weather Link page, underneath WIFI router setup, you will find the 'Search' button. Sometimes, your router is automatically found and its name entered into the Router box next to the Search button. If it's not there, click the search button and the base station will start looking for local Wifi networks.

Connect the batteries in the battery compartment & then press the Reset button. The LED should start to flash. See diagram below. The outside data should start to appear on the Base station screen, after a few minutes.

The 5-in-1 outdoor sensor transfers reliably all measured values for wind speed, wind direction, humidity, temperature and precipitation rate to the base station. On the clearly structured display of the base station not only these values can be read but also a multitude of history data.

BRESSER is known all across Europe for an excellent price-performance-ratio and the products for their diverse fields of applications. The product line constantly is updated with new related products.

All measurements are displayed on the weather station's intuitive colour display, as well as in the app, enabling you to keep track of what's happening in your garden – even when you're away from home. You can also use the app to view stats on your daily and monthly water consumption.

If the WIFI signal is not stable or the base station tries to connect to the router, the icon will flash. If the icon disappears, it means that the base station cannot connect to the WIFI router or cannot switch to AP mode.

Leave the sensors and the base station together for a minimum of 2-3 hours to ensure full synchronisation has occurred. If this does not resolve the issue, repeat the process using brand new batteries, as it only takes one dead battery to stop the sensor from transmitting.

INSTALLING BATTERIES

Losen the screws of the wireless 5-in1 sensor at the bottom of the battery compartment cover and remove the cover. Insert the batteries according to the right polarity (+/-) as shown in the compartment. Replace the battery compartment cover and tighten the screws by hand.

The indoor/outdoor temperature and humidity readings, as well as the Barometric Pressure, can be calibrated on the display to improve accuracy. Calibration improves accuracy when sensor/display placement or environmental factors impact your data accuracy.

How do I reset my outside temperature sensor? ›

General conditions: Exposure to temperatures outside the operating range - Damage can occur to internal components, causing erroneous readings if thermometers are exposed to extreme temperatures. Shock and vibration - The components in a thermometer are sensitive to extreme levels of shock and vibration.

On the Pro Weather Link page, underneath WiFi router setup, you will find the 'Search' button. Sometimes, your router is automatically found, and its name entered into the Router box next to the Search button. If it's not there, click the search button and the base station will start looking for local WiFi networks.

WMO Number – World Meteorological organization

This is a 5-digit numeric code to identify a land weather station. The first two digits are referred to as the "block number" and refer to the geographic area (00-29 Europe, 30-59 Asia, 60-68 Africa, 69 special use, 70-79 North America, 80-89 South America, 90-99 Oceania).

The Bottom Line

The Ambient Weather WS-2000 Smart Weather Station is our pick for the best home weather station overall because it's an advanced, capable device that's yours for a great price.

The Ambient Weather WS-2000 Smart Weather Station is our pick for the best home weather station overall because it's an advanced, capable device that's yours for a great price.

The Bresser Corporation is a Germany-based manufacturer of binoculars, telescopes,microscopes, and weather stations.

Bresser Weather Stations – Made in China.

As the most trusted news source, most trusted brand, and most accurate weather forecaster, The Weather Channel and its parent The Weather Company help turn weather into action.